[olug] Getting LILO back
Jay Woods
woodsjay at home.com
Mon Aug 7 11:20:45 UTC 2000
I have found out that grub-boot-0.5.95.tar.gz doesn't have the documentation. To find out this
much meant that I had to locate, purchase, and download WinZip. (I have used an evaluation copy
for years on another system no longer available to me. It seemed only right to purchase one for a
change.) The grub-0.5.95.tar.gz is innocent of holding a docs subdirectory. However, it does have
a bunch of .texi files which look worthwhile. Note: I am having to use a seldom used copy of
Windoze. This means that I can't as the Readme says "See the GRUB manual for details about using
GRUB as your bootloader. Type "info grub" in the shell prompt." Now there is a grub.info file
which is not terribly readable by human beings. However, there is a reference to a grub.texi file.
This is a little more readable and references a tutorial.texi file. I should be able to read over
this file (and use the results this evening). Yes, the rawrite program (and an even better one,
suitable for windows) is on the Linux Mandrage 7.02 CD-ROM. Now if I can get the verdammen CD-RW
drive to actually open and recognize I've put a CD-ROM in it, life will proceed. THIS time I'm
going to copy all those windows utilities onto the hard drive. ---Jay
Daniel Pfile wrote:
> oops, my bad, the docs are in the tar ball in gnu info files, i asumed you
> downloaded that and looked at it, just checks out the directory named
> 'docs' winzip can handle .tar.gz files just dandy
>
> ---
>
> just use rawrite.exe to write the image on the ftp site to a floppy.
>
> ftp://alpha.gnu.org/gnu/grub/grub-boot-0.5.95.image
>
> you can find rawrite.exe on practicly every linux distro site
>
> ---
>
> or grab the tarball and stick the two files together with
>
> copy /b stage1 + stage2 grub.raw
>
> then rawrite grub.raw to the floppy
>
> ftp://alpha.gnu.org/gnu/grub/grub-boot-0.5.95.tar.gz
>
> ---
>
> enjoy
>
> | Daniel Pfile | I'm to cool for a signature |
> | pfiled at marietta.edu | --------------------------- |
>
> On Sun, 6 Aug 2000, Jay Woods wrote:
>
> > I was unable to follow up on your message because the site you gave had no clue as to how to
> > use Windows to build the floppy. ---Jay
> >
> > Daniel Pfile wrote:
> >
> > > Did you get my email about grub? I'm not kidding, it's really easy
> > > compared to lilo, and better.
> > >
> > > Here's how to do it
> > >
> > > 1: Create a grub boot floppy according to the manual from within windows
> > > 2: Figure out what disk and partition linux is on, ide and scsi are not
> > > distinguised, it goes by what the bios sees, i'll use the second disk,
> > > first partition for the example (1,0). Then figure out which device
> > > LINUX thinks the root / partition is on, i'll use /dev/sda1 for my example.
> > > 3: Figure out where your kernel is, i'll use /vmlinuz for an example,
> > > you may have one in /boot/vmlinuz /boot/vmlinuz-2.2.17, and so on, grub
> > > supports command line completion, so just start typing at the grub
> > > prompt and hit tab to fill in the names of files.
> > > 4: Stick the floppy in, reboot computer
> > > 5: At grub> prompt, type: 'grub> kernel hd(1,0)/vmlinuz root=/dev/sda1'
> > > 6: add any other kernel options you want (in addition to root=/dev/sda1)
> > > by putting a space and the option for example: 'grub> hd(1,0)/vmlinuz
> > > root=/dev/sda1 mem=256M single'
> > > 7: hit enter
> > > 8: if it finds the kernel, it will respond with a message saying so.
> > > 9: type 'grub> boot'
> > > 10: watch linux boot
> > >
> > > check out the grub manual, web page, faq for more information on how to
> > > put grub on your hard disk it's self, make a cool looken menu, make it
> > > load 98, nt, w2k, fbsd, etc, etc, etc.
> > >
> > > - Daniel
> > >
> > > Jay Woods wrote:
> > > >
> > > > I want to thank everybody for their help. Unfortunately nothing is working out. I have
> > > > been able to boot up with tomsrtbt - 1.7.101 and my stuff is still there. However:
> > > >
> > > > I haven't been able to boot up from the CD-ROM (for example, Linux Mandrake v7.02).
> > > > I can boot up on the emergency boot disk with the command at LILO of linux
> > > > root=/dev/hdb6 BUT it always tries to boot to hda6 which isn't there.
> > > > I have been able to set up a new lilo.conf file that has hdb6 instead of hda6 BUT
> > > > when I run lilo at the root command line, it refuses to write to the MBR saying
> > > > something about it isn't marked for it.
> > > >
> > > > I'm ready to pay for somebody to come and fix it. ---Jay
> > > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: olug-unsubscribe at bstc.net
> > > For additional commands, e-mail: olug-help at bstc.net
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: olug-unsubscribe at bstc.net
> > For additional commands, e-mail: olug-help at bstc.net
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: olug-unsubscribe at bstc.net
> For additional commands, e-mail: olug-help at bstc.net
---------------------------------------------------------------------
To unsubscribe, e-mail: olug-unsubscribe at bstc.net
For additional commands, e-mail: olug-help at bstc.net
More information about the OLUG
mailing list