[olug] eth0 again

[David Walker]

If this machine has a PCI slot I'd recommend blowing $12 to $15 dollars
at DIT or somewhere and getting a cheap PCI network card.  Every one
that I've purchased from there has been recognized easily by Linux.  I
have a couple of older SMC cards laying around but it's easier to buy a
new one then spend a lot of time on the old one.

On Thursday 30 August 2001 19:05, you wrote:
> Ok a couple days back I asked about this and got a bunch of responses I
> have tried everything even moved card but nada. Here is what I have and
> what I get.  It is a EtherEZ SMC-8416T ISA card.  The how to says yes it is
> supported as SMC-ULTRA and they recommend disabling the PNP in bios for
> that IRQ.  So I booted in the dos mode and ran the SMC utility to get the
> I/O and irq and made appropriate changes.  I rebooted and it said getting
> etho delaying init of eth0 then fails. I added the info to the modules.conf
> and restarted same thing I went in and added it with netconfig now system
> locks up on boot.  It does not delay eth0 but just stops there.  I pulled
> out the sound card and modem on the chance it was a conflict that I was not
> seeing as when I changed it one time the sound card crashed too.  Oh well
> ANY ideas or where would be a good place to start over from.  How can I get
> by where it stops on boot other than reloading linux (which I am getting
> tired of doing).
>
> Thanks Tom

----------------------------------------
Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1"
Content-Transfer-Encoding: quoted-printable
Content-Description: 
----------------------------------------

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

For help contact olug-help at bstc.net - run by ezmlm
to unsubscribe, send mail to olug-unsubscribe at bstc.net
or `mail olug-unsubscribe at bstc.net < /dev/null`
(c)2001 OLUG http://www.olug.org

-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_