[olug] redhat 7.3
Jonathan Warren
jonwarren at cox.net
Tue Jul 30 21:26:41 UTC 2002
Did you add a line to modules.conf or conf.modules that had the alias and the options should look something like this.
alias eth0 3c509
options eth0 irq=10 io=0x320
On Tue, Jul 30, 2002 at 04:03:55PM -0700, Gary wrote:
> Could the module be loading _after_ eth0 tries to initialize?I don't know
> much about the bootup sequence and when and how eth0 kicks in but it seems
> to me that might do it especially since lsmod shows your module is loaded.
>
> Gary
>
>
> ----- Original Message -----
> From: "Nate" <tbrownarcher at cox.net>
> To: <olug at olug.org>
> Sent: Tuesday, July 30, 2002 12:29 PM
> Subject: Re: [olug] redhat 7.3
>
>
> > yes it must be loading but in the beginning boot up I see ---loading eth0
> > failed.
> > but the driver 3c59x is in the lsmod.
> > also in the /etc/sysconfig/network-scripts I find a file called ifup@ in
> this
> > file there is no DHCPCDARGS section but there is a section called
> DHCP_ARGS.
> > But I did not find a broadcast . Also that file is very long not just a
> list
> > but script I think so I don't think I found the right place
> >
> > Thanks,
> > Nate
> >
> > Trent Melcher wrote:
> >
> > > Nate
> > >
> > > Have you done an lsmod to see if the NIC card modules are loading, Im
> > > guessing they are if you see the 3c59x driver.
> > > THis driver is appropriate for the 3c90x family of cards.
> > >
> > > Trent
> > >
> > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=
> > > Trent Melcher (tmelcher at trilogytel.com)
> > > StarTouch International
> > > Network/System Administrator
> > > Phone:402.346.4600x103
> > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=
> > >
> > > -----Original Message-----
> > > From: Nate [mailto:tbrownarcher at cox.net]
> > > Sent: Monday, July 29, 2002 9:40 PM
> > > To: olug at olug.org
> > > Subject: Re: [olug] redhat 7.3
> > >
> > > Yes i have mike. But never with dhcp. The windows card I use (smc
> ultra)
> > > has
> > > never worked in linux and the 3com card has never worked in windows.
> > > thanks,
> > > Nate
> > >
> > > Mike Peterson wrote:
> > >
> > > > Have you ever connected with this NIC card in this system to your
> network?
> > > > Some 3COM cards are windows only.
> > > > Like WinModems.
> > > >
> > > > ----- Original Message -----
> > > > From: "Nate" <tbrownarcher at cox.net>
> > > > To: <olug at olug.org>
> > > > Sent: Monday, July 29, 2002 3:38 PM
> > > > Subject: Re: [olug] redhat 7.3
> > > >
> > > > > I heard that Mandrake 8.2 was simple and would fix my internet
> > > connection
> > > > with no problem so I
> > > > > tried it. SAME EXACT problem as when I tried RedHat 7.3. when I
> try
> > > the
> > > > browser I get host
> > > > > unknown error.
> > > > > During boot of the Mandrake system there is an error that ETH0
> failed
> > > just
> > > > like RedHat.
> > > > > All dection measures I use detect my NIC card (3c900b) and give me
> a
> > > > driver name (3c59x).
> > > > > This is exactly what RedHat returns. In Mandrake the network state
> is
> > > > down. I have looked for
> > > > > Howto's and read the ones I have found but I don't find many and
> what I
> > > do
> > > > find does not seem
> > > > > to be the problem.
> > > > >
> > > > > I use to be connected with an IP address but not since DHCP so I
> don't
> > > > know if it's me or cox.
> > > > >
> > > > > all help again would be appreciated.
> > > > >
> > > > > Thanks,
> > > > > Nate
> > > > >
> > > > >
> > > > > Nate wrote:
> > > > >
> > > > > > Ok! I have done that. I think I just don't know what to plug into
> the
> > > > fields or something
> > > > > > like that. Maybe there is an example graphic somewhere or
> something
> > > > like that ... It seems
> > > > > > to me I have things right but it don't work so it must be
> somethign
> > > i'm
> > > > getting wrong.
> > > > > >
> > > > > > I thought dhcp was supposed to be easy. Since my eth0 does not
> load
> > > and
> > > > my connection does
> > > > > > not activate it may be something to do with my nic card and I
> don't
> > > know
> > > > what.
> > > > > >
> > > > > > thanks,
> > > > > > Nate
> > > > > >
> > > > > > CM Miller wrote:
> > > > > >
> > > > > > > My bad...again...Wrong path...This is the path that
> > > > > > > you want to go on...
> > > > > > >
> > > > > > > /etc/sysconfig/network-scripts and vi ifcfg-eth0
> > > > > > >
> > > > > > > or
> > > > > > >
> > > > > > > use this @ the command line: internet-druid
> > > > > > >
> > > > > > > This will get you the GUI to configure ifcfg-eth0.
> > > > > > >
> > > > > > > -Chris
> > > > > > >
> > > > > > > --- Nate <tbrownarcher at cox.net> wrote:
> > > > > > > > I can't check the file /etc/sysconfig/ifconfig it
> > > > > > > > does not exist so I must not have done
> > > > > > > > something. What would it be??
> > > > > > > >
> > > > > > > > I do have cox at home and I THOUGHT
> > > > > > > > I had DHCP enabled, everything I see says it's using
> > > > > > > > dhcp
> > > > > > > >
> > > > > > > > thanks,
> > > > > > > > Nate
> > > > > > > >
> > > > > > > > CM Miller wrote:
> > > > > > > >
> > > > > > > > > Nate -
> > > > > > > > >
> > > > > > > > > Again, check out google.com/linux or redhat.com to
> > > > > > > > > help troubleshoot this problem...
> > > > > > > > >
> > > > > > > > > This url talks about getting your internet
> > > > > > > > connection
> > > > > > > > > goin'. Are you dial up or cable modem?
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > >
> > >
> http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/getting-started-guid
> > > > e/ch-ppp.html
> > > > > > > > >
> > > > > > > > > Do you have DHCP disabled or enabled?
> > > > > > > > >
> > > > > > > > > You can also check /etc/sysconfig/ifconfig and
> > > > > > > > should
> > > > > > > > > be able to edit this file to get you goin'.
> > > > > > > > >
> > > > > > > > > And, if you have COX at Home and get it goin' let me
> > > > > > > > > know, cause since I've upgraded to 7.3 I can't get
> > > > > > > > > connected. I have a linksys router and have
> > > > > > > > > disabled DHCP cause I've been screwin' around with
> > > > > > > > > remote access.
> > > > > > > > >
> > > > > > > > > Let us know how it goes...
> > > > > > > > >
> > > > > > > > > -Chris
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- Trent Melcher <tmelcher at trilogytel.com> wrote:
> > > > > > > > > > Nate
> > > > > > > > > >
> > > > > > > > > > Have you run lsmod to see if the nic card was
> > > > > > > > > > loaded??? If it is, I had to
> > > > > > > > > > modify the ifup script in
> > > > > > > > > > /etc/sysconfig/network-scripts.
> > > > > > > > > >
> > > > > > > > > > I added -dDCB to the DHCPCDARGS around line 104.
> > > > > > > > > > COx requires the -B
> > > > > > > > > > Broadcast option. Not really sure if the others
> > > > > > > > are
> > > > > > > > > > neccessary.
> > > > > > > > > >
> > > > > > > > > > Trent
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=
> > > > > > > > > > Trent Melcher (tmelcher at trilogytel.com)
> > > > > > > > > > StarTouch International
> > > > > > > > > > Network/System Administrator
> > > > > > > > > > Phone:402.346.4600x103
> > > > > > > > > >
> > > > > > > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=
> > > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Nate [mailto:tbrownarcher at cox.net]
> > > > > > > > > > Sent: Wednesday, July 24, 2002 8:48 PM
> > > > > > > > > > To: olug at olug.org
> > > > > > > > > > Subject: Re: [olug] redhat 7.3
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Thanks to everyone, I got redhat 7.3 going.
> > > > > > > > But!
> > > > > > > > > > Like redhat 7.2 I can't
> > > > > > > > > > get
> > > > > > > > > > the network going.
> > > > > > > > > > I get more info this time with this ver though.
> > > > > > > > My
> > > > > > > > > > fault I'm sure.
> > > > > > > > > >
> > > > > > > > > > In boot up it never activates eth0. It's set
> > > > > > > > dhcp
> > > > > > > > > > because i'm on cox
> > > > > > > > > > internet. Every setting I can find is set eth0
> > > > > > > > but
> > > > > > > > > > I can't get it to
> > > > > > > > > > activate. I don't know but I'm pretty sure the
> > > > > > > > nic
> > > > > > > > > > card is there?
> > > > > > > > > > The nic card is 3com and there is another one
> > > > > > > > smc
> > > > > > > > > > ultra but it's not setup
> > > > > > > > > > in
> > > > > > > > > > linux at all and from past experience I dont'
> > > > > > > > think
> > > > > > > > > > I can get it setup ....
> > > > > > > > > >
> > > > > > > > > > Thanks for any help
> > > > > > > > > > Nate
> > > > > > > > > >
> > > > > > > > > > Jordan Wilberding wrote:
> > > > > > > > > >
> > > > > > > > > > > Open Nero, goto File->Burn From Image, choose
> > > > > > > > your
> > > > > > > > > > iso,and there you go!
> > > > > > > > > > >
> > > > > > > > > > > -Jordan Wilberding
> > > > > > > > > > >
> > > > > > > > > > > > On Tuesday 23 July 2002 13:14, you wrote:
> > > > > > > > > > > > ok! thanks , I have gotten all the iso's
> > > > > > > > > > downloaded.. How do I get
> > > > > > > > > > them
> > > > > > > > > > > > on the cd ? I'm using windows and Nero. Is
> > > > > > > > > > there a way to do it with
> > > > > > > > > > > > that?
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > Nate
> > > > > > > > > > > >
> > > > > > > > > > > > VincentR wrote:
> > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> ftp://mirrors.kernel.org/pub/redhat/redhat/linux/7.3/en/iso/i386/
> > > > > > > > > > > > >
> > > > > > > > > > > > > It's the fastest mirror I've found.
> > > > > > > > > > > > >
> > > > > > > > > > > > > ----- Original Message -----
> > > > > > > > > > > > > From: "Nate" <tbrownarcher at cox.net>
> > > > > > > > > > > > > To: <olug at olug.org>
> > > > > > > > > > > > > Sent: Monday, July 22, 2002 3:38 AM
> > > > > > > > > > > > > Subject: [olug] redhat 7.3
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Can someone tell me another way to get
> > > > > > > > > > redhat 7.3. The site
> > > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > (ftp://ftp.redhat.com/pub/redhat/linux/7.3/en/iso/i386/.)
> > > > > > > > > > doesn't
> > > > > > > > > > see
> > > > > > > > > > > > > > to be working. or at least it won't let
> > > > > > > > me
> > > > > > > > > > in. I don't ever seem to
> > > > > > > > > > > > > > have much success at this . I finally
> > > > > > > > > > accomplish it but it takes
> > > > > > > > > > hrs
> > > > > > > > > > > > > > of agony for me.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > thanks,
> > > > > > > > > > > > > > nate
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > For help contact olug-help at olug.org -
> > > > > > > > run by
> > > > > > > > > > ezmlm
> > > > > > > > > > > > > > to unsubscribe, send mail to
> > > > > > > > > > olug-unsubscribe at olug.org
> > > > > > > > > > > > > > or `mail olug-unsubscribe at olug.org <
> > > > > > > > > > /dev/null`
> > > > > > > > > > > > > > (c)1998-2002 OLUG http://www.olug.org
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > > > > > > > >
> > > > > > > > > > > > > For help contact olug-help at olug.org - run
> > > > > > > > by
> > > > > > > > > > ezmlm
> > > > > > > > > > > > > to unsubscribe, send mail to
> > > > > > > > > > olug-unsubscribe at olug.org
> > > > > > > > > > > > > or `mail olug-unsubscribe at olug.org <
> > > > > > > > > > /dev/null`
> > > > > > > > > > > > > (c)1998-2002 OLUG http://www.olug.org
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > > > > > > >
> > > > > > > > > > > > For help contact olug-help at olug.org - run by
> > > > > > > > > > ezmlm
> > > > > > > >
> > > > > > > === message truncated ===
> > > > > > >
> > > > > > > =====
> > > > > > > *****************************************
> > > > > > > GAIM ID: cmmiller1973
> > > > > > > *****************************************
> > > > > > >
> > > > > > > __________________________________________________
> > > > > > > Do You Yahoo!?
> > > > > > > Yahoo! Health - Feel better, live better
> > > > > > > http://health.yahoo.com
> > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > > >
> > > > > > > For help contact olug-help at olug.org - run by ezmlm
> > > > > > > to unsubscribe, send mail to olug-unsubscribe at olug.org
> > > > > > > or `mail olug-unsubscribe at olug.org < /dev/null`
> > > > > > > (c)1998-2002 OLUG http://www.olug.org
> > > > > > >
> > > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > >
> > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > > >
> > > > > > For help contact olug-help at olug.org - run by ezmlm
> > > > > > to unsubscribe, send mail to olug-unsubscribe at olug.org
> > > > > > or `mail olug-unsubscribe at olug.org < /dev/null`
> > > > > > (c)1998-2002 OLUG http://www.olug.org
> > > > > >
> > > > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > > >
> > > >
> > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > > >
> > > > For help contact olug-help at olug.org - run by ezmlm
> > > > to unsubscribe, send mail to olug-unsubscribe at olug.org
> > > > or `mail olug-unsubscribe at olug.org < /dev/null`
> > > > (c)1998-2002 OLUG http://www.olug.org
> > > >
> > > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > >
> > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > >
> > > For help contact olug-help at olug.org - run by ezmlm
> > > to unsubscribe, send mail to olug-unsubscribe at olug.org
> > > or `mail olug-unsubscribe at olug.org < /dev/null`
> > > (c)1998-2002 OLUG http://www.olug.org
> > >
> > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > >
> > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> > >
> > > For help contact olug-help at olug.org - run by ezmlm
> > > to unsubscribe, send mail to olug-unsubscribe at olug.org
> > > or `mail olug-unsubscribe at olug.org < /dev/null`
> > > (c)1998-2002 OLUG http://www.olug.org
> > >
> > > -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
> >
>
>
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
>
> For help contact olug-help at olug.org - run by ezmlm
> to unsubscribe, send mail to olug-unsubscribe at olug.org
> or `mail olug-unsubscribe at olug.org < /dev/null`
> (c)1998-2002 OLUG http://www.olug.org
>
> -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
For help contact olug-help at olug.org - run by ezmlm
to unsubscribe, send mail to olug-unsubscribe at olug.org
or `mail olug-unsubscribe at olug.org < /dev/null`
(c)1998-2002 OLUG http://www.olug.org
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
More information about the OLUG
mailing list