[olug] Community Colo Project

[Charles.Bird]

I could most likley donate a 1950 with dual 15k rpm sas drives, 4GB ram, and
dual 1GbE.



On Thu, Mar 26, 2009 at 5:06 PM, Curtis LaMasters <curtislamasters at gmail.com
> wrote:

> I understand the reliabilty aspect.  No question there.  But one could
> argue that the hardware in most "platform" based devices, i.e. Cisco
> are not too far from being commodity.  The ASA 5505 has a Celeron
> processor, the PIX 501 has an AMD Elon and the Cisco 3640 uses a R4700
> RISC.
>
> Unless I am from another planet, they are all purchasable processors
> for the public and really nothing special. I am not recommending
> putting a whitebox together to make a routing platform, but possibly
> take a Dell 1750 with dual processors, ECC memory, RAID 1 on SCSI
> 10k's and dual power supplies.  I bet you'd be hard pressed to find a
> "platform" device with as much redundnacy.
>
> I'm not the sharpest tool in the shed, but I'm willing to bet that
> there are 10+ on this list that can figure out ANY issue using a FOSS
> based router.
>
> Curtis LaMasters
> http://www.curtis-lamasters.com
> http://www.builtnetworks.com
>
>
>
> On Thu, Mar 26, 2009 at 4:53 PM, Dan Clough <dclough at gmail.com> wrote:
> > I personally have no objections if you can put together a system
> > that's as stable or more stable than a hardware router.  Call me
> > biased if you'd like, it's just that I've spent the last week trying
> > to get some phantom glitches out of one of my newer custom-built
> > boxes.
> >
> > I don't have a whole lot of experience with the open source
> > alternatives, just the underlying hardware, so I guess I have yet to
> > see how stable the actual software really is.
> >
> > On Thu, Mar 26, 2009 at 4:43 PM, Curtis LaMasters
> > <curtislamasters at gmail.com> wrote:
> >> What's complex about it?  I have found pfsense much simpler to
> >> configure typical features minus BGP compared to Cisco or Juniper and
> >> I originally came from a Cisco background.  We can take this offline,
> >> I'm fine with that.
> >>
> >> Curtis LaMasters
> >> http://www.curtis-lamasters.com
> >> http://www.builtnetworks.com
> >>
> >>
> >>
> >> On Thu, Mar 26, 2009 at 4:03 PM, Phil Brutsche <phil at brutsche.us>
> wrote:
> >>> By big problem with most FOSS routers and firewalls is the complexity,
> >>> both in the hardware and the software.
> >>>
> >>> I never liked pfsense and always preferred the original m0n0wall
> exactly
> >>> for that reason.
> >>>
> >>> Curtis LaMasters wrote:
> >>>> I would vote FOSS for the firewall/router setup (pfsense or vyetta)
> >>>> would work fine.  I could donate time for sure and hardware possibly
> >>>> to accomplish that.  With pfsense we would have the ability to do VPN,
> >>>> IDS/IPS, Failover, and even BGP if required, however, I'm with Phil
> >>>> that BGP it's overkill. However, I do have one somewhat dumb question?
> >>>>  What would you all put on the your community DC hosted servers?
> >>>
> >>> --
> >>>
> >>> Phil Brutsche
> >>> phil at brutsche.us
> >>> _______________________________________________
> >>> OLUG mailing list
> >>> OLUG at olug.org
> >>> https://lists.olug.org/mailman/listinfo/olug
> >>>
> >> _______________________________________________
> >> OLUG mailing list
> >> OLUG at olug.org
> >> https://lists.olug.org/mailman/listinfo/olug
> >>
> > _______________________________________________
> > OLUG mailing list
> > OLUG at olug.org
> > https://lists.olug.org/mailman/listinfo/olug
> >
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> https://lists.olug.org/mailman/listinfo/olug
>



-- 
The information transmitted in this e-mail message and attachments, if
any, may be of a confidential matter, and is intended only for the use
of the individual or entity named above. Distribution to, or review
by, unauthorized persons is prohibited. All personal messages express
views solely of the sender, which are not to be attributed to
MobileNow, Inc.. If you have received this transmission in error,
immediately notify the sender and permanently delete this transmission
including attachments, if any.