[olug] Linux CNC 2.6.4

[Kevin]

NFM had a makerbot for sale when I went in there the other day. I didn't
get any specs, but IIRC the effective printing area was a little more than
12in x 12in x 8in.

On Tue, Dec 30, 2014 at 12:48 PM, Damian Harouff <cekkent at gmail.com> wrote:

> I have a 3d printer. If you need any brackets or whatnot printed, don't
> hesitate to get in touch. I use Sketchup myself.
>
> -Damian
>
> On Tue, Dec 30, 2014 at 12:15 PM, unfy <olug at unfy.org> wrote:
>
> > I have all the electronics for some 70-something oz/in Nema17's (for what
> > this is, that's on the small side).
> >
> > I have a PC that passes linuxcnc's latency test with ~10k-11k ns jitter
> > (an AMD 2800+ system).
> >
> > I believe the only two things I need to do is draw something up in
> > Sketchup Make (or something) for the physical bits and pick up some 5/16
> > all thread or M8 all thread as my lead screws.
> >
> > The plan is to use aluminum square tubing brazed together for the mobile
> > gantry.  Since I'm building the system at a size not documented
> elsewhere,
> > kinda need to draw it up so I know how long to cut things etc.
> >
> > Well.  Actually, I think there might be plans for a 16x22 build out
> > there.  My initial plans are for 16x16.  I'll prolly just do 16x22
> anyway -
> > this eliminates needing to draw anything really.
> >
> > -unfy
> >
> >
> >
> >
> >
> > _______________________________________________
> > OLUG mailing list
> > OLUG at olug.org
> > https://lists.olug.org/mailman/listinfo/olug
> >
> _______________________________________________
> OLUG mailing list
> OLUG at olug.org
> https://lists.olug.org/mailman/listinfo/olug
>